What should I check before buying a Fiesta ST180?

Check the VIN, registration documents, service and MOT history first. Then inspect the car cold and warm, including oil, coolant, leaks, warning lights, clutch, gearbox, brakes, steering, tyres, alignment, shell, underside, repairs and every engine, suspension or body modification.

What engine does the Fiesta ST Mk7 use?

Ford describes the European 2013 Fiesta ST as using a 1.6-litre EcoBoost petrol engine with a six-speed manual transmission. Its official launch material quotes 182 PS and 240 Nm, while this site converts the approved print power to 179 bhp.

Which years does the catalogue Fiesta ST Mk7 drawing cover?

The catalogue drawing covers 2013 to 2017. Ford says the European Fiesta ST launched in 2013, and the site keeps the picture bounded to the years represented by Jonathan’s reviewed artwork rather than the wider life of the ordinary Fiesta generation.

Why does the Fiesta ST180 print say 179 bhp?

ST180 refers to the familiar 182 PS headline, and 182 PS converts to about 179 bhp. The catalogue labels power as bhp, so it does not copy a PS figure and give it the wrong unit.

← The journal

Ownership1 August 20267 min read

A Fiesta ST180 viewing starts with the car, not the reputation

Inspection light, blank service folder and tyre gauge on a workshop bench — A lively test drive cannot fill a gap in the history.

In short

Ford launched the European Fiesta ST in 2013 with a 1.6-litre EcoBoost engine, 182 PS and 240 Nm.
Inspect one car from cold, check its history and identify every modification before deciding what a symptom means.
The catalogue drawing covers 2013 to 2017 and uses Jonathan’s signed-off ST180 poster figures.

An ST180 can collect tyres, suspension, exhaust parts and software long before an advert collects the detail needed to explain them. Establish the identity and history first. Then inspect the condition of the car those records describe.

How do you establish that a Fiesta is an ST180?

Match the VIN and registration documents to the car, then make the 1.6-litre engine, equipment, dates and service record agree. A grille, wheel or badge supports that description but does not prove the identity by itself.

Use the GOV.UK MOT history service to compare dates, mileage and recorded defects. Read invoices as a continuous record rather than counting pages. Ask Ford or a suitable specialist to resolve an identity question.

What does Ford confirm about the Fiesta ST180?

Ford launched the European Fiesta ST in 2013 with a 1.6-litre EcoBoost petrol engine, a six-speed manual gearbox, 182 PS and 240 Nm. Its launch material quotes 6.9 seconds to 100 km/h and a top speed of 220 km/h.

Those manufacturer figures identify the model. They do not establish what power a modified used car makes now, or whether its maintenance supports the claim in an advert. The Fiesta ST generation guide separates this 2013 to 2017 face from the Mk6 and the two Mk8 drawings.

What should you check at a Fiesta ST180 viewing?

Inspect the identity, fluids, underside and modification record before driving. Then use the car from cold to fully warm and write down what it does. A checklist exposes an open question. An inspection or diagnosis answers it.

At the viewingSix checks before deciding

0 of 6 checked. This stays on this page only.

Which Fiesta ST180 figures does the catalogue print use?

The print uses Jonathan’s signed-off 2014 poster specification. Its 179 bhp converts the 182 PS headline into the unit printed across the catalogue, while its weight remains the lighter figure Jonathan explicitly approved for this portrait.

Ford Fiesta ST Mk7, catalogue specification

Engine: 1.6L Turbo EcoBoost
Power: 179 bhp
Torque: 240 Nm
Weight: 1088 kg
0 to 60: 6.7 sec
Top speed: 139 mph

These are poster figures, not a promise about a used car. Keep Ford’s 0 to 100 km/h launch time separate from the print’s 0 to 60 mph value because they are not the same measurement.

Which sources support this Fiesta ST180 guide?

Ford’s official launch material supports the engine, transmission, power, torque and 2013 launch. GOV.UK supplies the live MOT route. The print’s exact performance block comes only from the signed-off catalogue model.

Read Ford’s European ST200 release, which records the 2013 ST launch specification and its UK ST-3 specification release. Neither replaces an inspection of one car. Once its identity is settled, open the Fiesta ST Mk7 builder.

Questions people actually ask

What should I check before buying a Fiesta ST180?: Check the VIN, registration documents, service and MOT history first. Then inspect the car cold and warm, including oil, coolant, leaks, warning lights, clutch, gearbox, brakes, steering, tyres, alignment, shell, underside, repairs and every engine, suspension or body modification.
What engine does the Fiesta ST Mk7 use?: Ford describes the European 2013 Fiesta ST as using a 1.6-litre EcoBoost petrol engine with a six-speed manual transmission. Its official launch material quotes 182 PS and 240 Nm, while this site converts the approved print power to 179 bhp.
Which years does the catalogue Fiesta ST Mk7 drawing cover?: The catalogue drawing covers 2013 to 2017. Ford says the European Fiesta ST launched in 2013, and the site keeps the picture bounded to the years represented by Jonathan’s reviewed artwork rather than the wider life of the ordinary Fiesta generation.
Why does the Fiesta ST180 print say 179 bhp?: ST180 refers to the familiar 182 PS headline, and 182 PS converts to about 179 bhp. The catalogue labels power as bhp, so it does not copy a PS figure and give it the wrong unit.

Written by Jonathan in Derby. Last updated 1 August 2026.